Industry Info

Installation and granulation characteristics of disc fertilizer granulator

2021/04/30
The disc granulator is convenient for continuous production, which greatly reduces the labor intensity and improves the labor efficiency. The reducer and motor are not only driven by flexible belt, which can start smoothly, slow down the impact force and improve the service life of the fertilizer granulation machine, but also the bottom of the granulating plate is strengthened by a number of radiant steel plates, which is firm and durable and not easy to deform.

Working principle of disc organic fertilizer granulator: the material enters the plate through the conveyor belt. With the rotation of the disc and the water sprayer, the material will be better combined with the water in the disc fertilizer granulator. The rotation of the disc makes the raw material fall and rise, and the particles gradually become larger with the passage of time. After reaching the predetermined diameter in the disc fertilizer granulator, the particles are taken out of the pot again for the next step.
fertilizer granulation machine
Installation instructions of disc fertilizer granulator
1. Installation: the disc granulator is installed on the ground foundation, and the unevenness is not more than 1 / 1000. After the equipment is fixed on the foundation, the anchor nut is tightened.
2. Trial use: after the disc granulator is fixed, fill the reducer, bearing seat and all rotating parts with lubricating oil before use, and connect the power for trial operation. Before starting the machine, check whether there are foreign matters around the machine and the turntable to block the operation, and whether the connecting bolts are tight. After everything is normal, start the machine to run. After one hour of test run, check whether the temperature of motor, reducer and bearing seat is normal (the temperature of motor, reducer and bearing seat shall not exceed 70 ℃ ° It's better.